|
New and used
test
equipment
rental and sales including:
oscilloscopes
network
analyzers
spectrum analyzers
and other electronic
testing
equipment from:
Tektronix
Agilent
Fluke
QuadTech,
Rohde
and Schwarz
among other respected
tested manufacturers.
|
Rohde & Schwarz SMB100A
RF Signal Generator |
The new SMB100A is designed to set a new standard in the mid-range. It incorporates the good performance of the predecessor SML, adds new features and puts it all in a compact housing. One of the major steps is for sure the extended frequency range up to 6 GHz. So the new instrument also covers the interesting bands between 3 and 6 GHz which are used by e.g. WiMAX, WLAN but also pulsed applications can be often found in this range. With the SMB100A, we will also introduce a new service concept allowing customers to decide if they want to perform it on their own or use certified R&S service sites. This opens up the access to many military oriented customers who prefer to service the instruments on their own. |
 |
To reserve your own today ---> |
|
|
The new reference in the “mid-range” analogue RF Signal Generator segment |
Key Features: |
- Wide: Frequency ranges: 9 kHz to 1 / 2 / 3 & 6 GHz
- High: RF output level of >+18 dBm from 1 MHz to 6 GHz. (+25 dBm over range)
- Fast: < 1 ms frequency and level setting times in “list mode”.
- Low: SSB phase noise: typ -128 dBc/Hz (1 GHz/20 kHz offset)
- Accurate: < 0.5 dB total uncertainty up to 3 GHz, (<0.9dB up to 6 GHz)
- No wear: Solid state RF attenuator up to 6 GHz w. reverse voltage protection
- Unique: Flexible concept allowing for on-site service with no calibration required.
- Long: Cal cycle of 3 years.
- Compact: < 12 lbs and only 2 rack-units high
- Connectivity: standard GPIB, LAN and USB remote control
Operations:
- Color display with 320 x 240 pixels (1/4 VGA)
- Intuitive user interface with graphical display of signal flow (block diagram)
- Online help including remote control commands
- Remote control via GPIB, LAN & USB
- USB connectors for USB devices (keyboard, mouse, memory stick etc.)
- Connector for NRP power sensors for accurate power measurements
- IEEE/GPIB bus commands according to SCPI
- R&S®SML IEEE/GPIB command set compatible
- Operation via remote operation from any web-browser
|
Applications: |
- RF-IC Development
- Mil/Aero Applications
- Mobile Radio Rx Measurements
- ATE and Production
- Scalar Network Analysis
- Wireless product tests
- Pulsed RF tests (Radar)
- General Purpose
- Receiver tests
- Amplifier tests
- Mixer/filter test
- LO or Clock
- EMC
- FM radio test
|
Available Accessories: |
| Item |
Item Number |
Description |
| ZZA-S234 |
1109.4493.00 |
19" rack adapter |
| R&S NRP-Z92* |
1171.7005.42 |
Power Sensor 9 kHz to 6 GHz |
| PSL-Z2 |
1157.6870.04 |
USB keyboard |
| PSL-Z10 |
1157.7060.03 |
USB mouse, optical |
| SMB100A-C5 |
1406.6000.02.C5 |
Calibration service, 5 years |
| SMB100A-R3 |
1406.6000.02.R3 |
Repair service, 3 years |
| SMB100A-R5 |
1406.6000.02.R5 |
Repair service, 5 years |
|
|
For More information call us at 800-937-4688 (option 2) or
 |
| |
| |
| |
|
