Agilent ENA (E5071C, E5061A, E5062A, E5070B, E5071B) Series RF Network Analyzers

Test Equipment Products

Logic Analyzers
Network Analyzers
Oscilloscopes
Signal/Spectrum Analyzers
Signal Generators
Wireless Communications

Manufacturers

Agilent (HP)
Dranetz-BMI
Fluke Networks
QuadTech
Rohde & Schwarz
Spirent (TAS)
Tektronix

New and used
test equipment
rental and sales including:
oscilloscopes
network analyzers
spectrum analyzers
and other electronic
testing equipment from:
Tektronix
Agilent
Fluke
QuadTech,
Rohde and Schwarz
among other respected
tested manufacturers.

Agilent ENA Series RF Network Analyzers
Models available: E5071C, E5061A, E5062A, E5070B, E5071B

The Agilent ENA Series network analyzers offer a wide range of RF solutions from very low cost basic S-parameter measurements to advanced multiport and balanced measurements. The standard ENA analyzers expand network analysis with advanced features, while the lower cost ENA-L analyzers provide basic S-parameter measurements with an integrated 50 or 75 ohm test set.

CLICK HERE

TO REQUEST A FREE QUOTE

Model	Frequency Range	Test Port System Dynamic Range (at Fmax)	Test Set	Available Measurement Features
E5071C ENA RF Network Analyzer	9 kHz to 8.5 GHz	>123 dB (117 dB)	2- or 4-port S-parameter	Balanced & harmonic measurements, mixer measurements & cal, embedding/de-embedding and port impedance conversion, time domain, built-in VBA
E5061A ENA-L RF Network Analyzer	300 kHz to 1.5 GHz	120 dB (120dB)	2-port Transmission / Reflection or S-parameter, 50 or 75 ohm	Cable fault location and SRL, built-in VBA
E5062A ENA-L RF Network Analyzer	300 kHz to 3 GHz	120 dB (120dB)	2-port Transmission / Reflection or S-parameter, 50 or 75 ohm	Cable fault location and SRL, built-in VBA
E5070B ENA RF Network Analyzer	300 kHz to 3 GHz	122 dB (122 dB)	2-, 3- or 4-port S-parameter	Balanced & harmonic measurements, mixer measurements & cal, embedding/de-embedding port impedance conversion, time domain, built-in VBA
E5071B ENA RF Network Analyzer	300 kHz to 8.5 GHz	122 dB (105 dB)	2-, 3- or 4-port S-parameter	Balanced & harmonic measurements, mixer measurements & cal, embedding/de-embedding and port impedance conversion, time domain, built-in VBA

For more information call us toll free (800) 937-4688, select option 2
or