Keithley 7700 Series Modules
Compatible for the 2700 Series Data Acquisition/Switching Systems

Model 7701:32-Channel, Differential MUX Module

The Model 7701 plug-in module offers 32 channels of 2-pole or 16 channels of 4-pole multiplexer switching. Its 32 channels can be configured for common-side 4-wire ohms. They can also be configured as two independent banks of multiplexers. It is ideal for RTD or thermistor temperature applications.

Get PDF Datasheet --- Module 7701

Model 7702: 40-Channel, Differential MUX Module w/Screw terminals

The Model 7702 plug-in module offers 40 channels of 2-pole or 20 channels of 4-pole multiplexer switching that can be configured as two independent banks of multiplexers. The Model 7702 provides two additional protected channels for current measurements. It is ideal for RTD, thermistor, and thermocouple temperature applications.

Get PDF Datasheet --- Module 7702

Model 7703: 32-Channel, High Speed Differential MUX Module

The Model 7703 plug-in module offers 32 channels of 2-pole or 16 channels of 4-pole multiplexer switching that can be configured as two independent banks of multiplexers. The nonlatching reed relays provide high speeds and are designed for 300 volt, 500mA; 10VA. The relay closures are stored in onboard memory. The Model 7703 is ideal for RTD and thermistor temperature applications.

Get PDF Datasheet --- Moduel 7703

Model 7705: 40-Channel, Single Pole Control Module

The Model 7705 plug-in module offers 40 channels of independent switching. These channels are designed to control power to the DUT and switching loads. They can also directly control light indicators, relays, etc.

Get PDF Datasheet --- Module 7705

Model 7706: All-in ONE I/O Module: 20-Channel Diff MUX w/Automatic CJC, 16 Digital Outputs, 2 Analog Outputs, Counter/Totalizer and Screw Terminal

The Model 7706 plug-in module offers 20 channels of 2-pole or 10 channels of 4-pole multiplexer switching with automatic CJC, as well as two analog output channels, 16 digital outputs, and one event counter/totalizer. The event counter/totalizer can be used to monitor and control system components, such as fixtures, limit switches, pass/fail indicators, external voltage sources, loads, door closures, revolutions, etc., while performing mixed signal measurements. The Model 7706 is ideal for RTD, thermistor, and thermocouple temperature applications.

Get PDF Datasheet --- Module 7706

Model 7707: 10-Channel, Differential MUX Module w/32Channel Digital I/O

The Model 7707 plug-in module offers 10 channels of 2-pole or 5 channels of 4-pole multiplexer switching that can be configured as two independent banks of multiplexers. The Model 7707 also provides 32 digital input/output channels (four 8-bit ports) for I/O control. Connect the Model 7707 to industry standard solid-state relays to switch up to 980VA.

Get PDF Datasheet --- Module 7707

Model 7708: 40-Channel, Differential MUX Module w/Automatic CJC and Screw Terminals

The Model 7708 plug-in module offers 40 channels of 2-pole or 20 channels of 4-pole multiplexer switching that can be configured as two independent banks of multiplexers. The built-in CJC sensors automatically linearize thermocouples, making the Model 7708 ideal for RTD, thermistor, and thermocouple temperature applications. It is also well-suited for mixed-signal measurement applications that require multipoint monitoring, such as environmental stress screening.

Get PDF Datasheet --- Module 7708

Model 7709: 6X8 Matrix Module

The Model 7709 plug-in module is a two-pole, 6׸ matrix module. It can connect any combination of six differential channels of instrumentation to any combination of eight differential device-under-test channels. The instrumentation can be AC and DC sources, internal or external meters, oscilloscopes, etc. This matrix configuration allows wide flexibility for complex test systems.

Get PDF Datasheet --- Module 7709

Model 7710: 20-Channel Solid State/Long-Life Differential Multiplexer w/Automatic CJC

The Model 7710 plug-in module offers 20 channels of 2-pole or 10 channels of 4-pole relay input that can be configured as two independent banks of multiplexers. The relays are solid state, providing long life and low maintenance. Solid-state relays usually have 100 times longer life than mechanical relays. It is ideal for long-term data logging applications as well as for demanding high-speed applications.

Get PDF Datasheet --- Module 7710

Model 7711: 2GHz Bandwidth 50-Ώ, Dual 1X4 Plug-IN RF Switching Module

The Model 7711 plug-in module provides an economical, wideband signal routing solution that complements the DC/low frequency switching and measurement capability of the Integra Series systems. The Model 7711 offers dual 1x4 configurations and can interface with a wide range of external AC instruments, including oscilloscopes, pulse generators, and signal analysis tools. One channel in each multiplex bank is always closed to the corresponding OUT connector. All connections are easily accessible from the rear panel.

Get PDF Datasheet --- Module 7711

Model 7712: 3.5 GHZ Bandwidth 50-Ώ. Dual 1X4 RF Switching Module

The Model 7712 plug-in module offers a 50Ω, dual 1x4 multiplexer configuration with rear panel SMA 1x4 connectors. Multiple multiplexers can be cascaded to build scalable matrix and multiplexer systems for a large number of devices under test and RF source/measurement instruments. One channel in each multiplex bank is always closed to the corresponding OUT connector. The 3.5GHz RF switching capability of the Model 7712 makes it ideal for applications such as 3G telecom, wireless LAN, and Bluetooth module testing.

Get PDF Datasheet --- Module 7712