|
New and used test
equipment rental and sales including: oscilloscopes network
analyzers spectrum analyzers and other electronic testing
equipment from: Tektronix Agilent Fluke QuadTech, Rohde
and Schwarz among other respected tested manufacturers.
|
Agilent E3634A-Single Output DC Power Supply
200 Watt DC Power Supply from the E363x Series
|
Agilent's E3634A is part of the E363xA-series of programmable dc power supplies give you the performance of system power supplies without the high price.
All models give you clean power, dependable regulation and fast transient response with built-in GPIB and RS-232 interface. E363xA-series are designed to meet the most demanding applications in R&D design verifications, production testing, and QA verifications with traditional quality and reliability you can count on. |
|
E3634A is a single output power supply that gives you the flexibility to select from dual output ranges. Output load is protected against overvoltage and overcurrent, which are easily monitored and adjusted from the front panel and remote interface. Remote sense is available to eliminate the errors due to voltage drops on the load leads. E3633A/34A offer front and rear output terminals. |
Clean and stable power with programmability at an affordable price
Features:
- Single and triple outputs
- 80W to 200W output power
- Dual output ranges
- Low noise and excellent regulation
- High accuracy and resolution
- Remote sense
- Front and rear output terminals
- GPIB and RS-232 standard
- Output Range 1: Range1: 175W, 25V, 7ARange 2: 200W, 50V, 4A
|
To request a free quote for E3634A
|
|
Available E3633A Power Options and Accessories:
|
Power Options: |
Opt. 0E3 230 Vac ± 10%
Opt. 0EM 115 Vac ± 10%
Opt. 0E9 100 Vac ± 10% |
Other Options: |
Opt. 0L2 Extra manual sets
Opt. 1CM Rack-mount kit*
|
Rackmount Kits* |
E3634A
To rack mount two instruments side by side:
Lock-link Kit
(P/N 5061-9694)
Flange Kit
(P/N 5063-9214)
To rack mount two instruments in a sliding support shelf
Support Shelf (P/N 5063-9256)
Slide Kit (P/N 1494-0015) required for support shelf
*Rackmounting with 1CM or lock-link/flange kit requires Agilent or customer supplied support rails
Agilent Support Rails - E3663AC |
|
See Other E3600 Series Power Supplies -- Click Here |
For more information call toll free 800-937-4688 (option 2) or
|
|
|
|
|
|
|