Test Equipment - Agilent's E3620A Dual Output DC Power Supply

Test Equipment Products

Logic Analyzers
Network Analyzers
Oscilloscopes
Signal/Spectrum Analyzers
Signal Generators
Wireless Communications

Manufacturers

Agilent (HP)
Dranetz-BMI
Fluke Networks
QuadTech
Rohde & Schwarz
Spirent (TAS)
Tektronix

New and used
test equipment
rental and sales including:
oscilloscopes
network analyzers
spectrum analyzers
and other electronic
testing equipment from:
Tektronix
Agilent
Fluke
QuadTech,
Rohde and Schwarz
among other respected
tested manufacturers.

Agilent E3620A DC Power Supplies
50 Watt DC Power Supply from the E3600 Series

The 50-watt E3620A dual-output power supply provides two 0 V to 25 Vdc outputs with the maximum current of 1 A to satisfy most bench requirements.

The outputs are completely independent and isolated. The feature separates digital panel meters so you can monitor voltage and current simultaneously. E3620A also protects your DUT against overload and short-circuit damage. Smooth turn-on and turn-off transitions keep power spikes out of your circuits.

With multiple supplies in a compact unit, the E3620A and E3630A give you excellent performance while
saving space on your bench. Both instruments feature tight 0.01 percent line and load regulation and a low
normal-mode noise specification of less than 0.35mV to ensure clean power for precision circuitry. With a
common-mode current specification of less than 1uA, both multiple-output power supplies minimize power line current injection.

Reliable and convenient power for benchtop use

Features:

Isolate dual outputs, 10 turn pots CV, CL
Output Drift: Voltage: Less than 0.1% + 5 mV total drift for 8 hours after an initial warm-up of 30 minutes.
Output Drift: Current: Less than 0.1% + 10 mA total drift for 8 hours after an initial warm-up of 30 minutes.
Output Range 1: 25W, 25V, 1A
Output Range 2: 25W, 25V, 1A

To request a free quote for E3620A

Available E3620A Power Options and Accessories:

Accessories Included:

Operating and service manuals and AC power cord

Power Options:

Opt. 0E3 230 Vac ±10%
Opt. 0EM 115 Vac ±10%
Opt. 0E9 100 Vac ±10%

Other Options:

Opt. 1CM Rack-mount kit* (E3614A, E3615A, E3616A, E3617A, E3620A)
Opt. 0L2 Extra Manual

Extra Manual Sets: E3620A Manual (P/N E3620-90001)

Rackmount Kits*

To rack mount instruments side by side
Lock-link Kit (P/N 5061-9694)
Flange Kit (P/N 5063-9212)
To rack mount one or two instruments in a sliding support shelf
Support Shelf (P/N 5063-9255)
Slide Kit (P/N 1494-0015) required for support shelf (For a single instrument, also order filler panel)
(P/N 5002-3999)
*Rackmounting with 1CM or lock-link/flange kit requires
Agilent or customer supplied support rails
Agilent Support Rails - E3663AC

See Other E3600 Series Power Supplies -- Click Here

For more information call toll free 800-937-4688 (option 2) or

For Manufacturer specifications -- Click Here