Test Equipment Products

Logic Analyzers
Network Analyzers
Oscilloscopes
Signal/Spectrum Analyzers
Signal Generators
Wireless Communications

Manufacturers

Agilent (HP)
Dranetz-BMI
Fluke Networks
QuadTech
Rohde & Schwarz
Spirent (TAS)
Tektronix

New and used
test equipment
rental and sales including:
oscilloscopes
network analyzers
spectrum analyzers
and other electronic
testing equipment from:
Tektronix
Agilent
Fluke
QuadTech,
Rohde and Schwarz
among other respected
tested manufacturers.

Agilent E3616A DC Power Supply
60 Watt DC Power Supply from the E3600 Series

Agilent's E3616A flexible 60-watt, single-range power supply can be used as either voltage or current sources. When output terminal voltage increases to a preset shut-down level, an overvoltage protection circuit disables the output to protect the device under test (DUT) from damage. The overvoltage protection feature is easily monitored and adjusted from the front panel.

Using remote sensing capability, these instruments automatically compensate for voltage drop in the
load leads, so you get accurate voltage at the DUT. You can combine multiple units in auto-parallel, auto-series and autotracking configurations for greater output voltage or current capacity. Front and rear output terminals allow flexible configuration. Output voltage and current can be controlled with external 0- to10-volt analog voltage or variable resistance.

Reliable and convenient power for benchtop use

This family of compact, single-output supplies offers solid performance and a variety of basic and enhanced capabilities.

Features:

Save space on the bench with small, compact form factor
Enhance measurement results via low-noise output with excellent regulation
Use remote sensing to compensate for voltage drops in load leads
Ensure DUT safety with over-voltage protection
Multiple supplies can be connected fortracking or higher power
Output Range 1: 35V, 1.7A

To request a free quote for E3616A

Available E3616A Power Options and Accessories:

Accessories Included:

Operating and service manuals and AC power cord

Power Options:

Opt. 0E3 230 Vac ±10%
Opt. 0EM 115 Vac ±10%
Opt. 0E9 100 Vac ±10%

Other Options:

Opt. 1CM Rack-mount kit* (E3614A, E3615A, E3616A, E3617A, E3620A)
Opt. 0L2 Extra Manual

Extra Manual Sets: E3614A/15A/16A/17A Manual (P/N 5959-5310)

Rackmount Kits*

To rack mount instruments side by side
Lock-link Kit (P/N 5061-9694)
Flange Kit (P/N 5063-9212)
To rack mount one or two instruments in a sliding support shelf
Support Shelf (P/N 5063-9255)
Slide Kit (P/N 1494-0015) required for support shelf (For a single instrument, also order filler panel)
(P/N 5002-3999)
*Rackmounting with 1CM or lock-link/flange kit requires
Agilent or customer supplied support rails
Agilent Support Rails - E3663AC

See Other E3600 Series Power Supplies -- Click Here

For more information call toll free 800-937-4688 (option 2) or

For Manufacturer specifications -- Click Here

Agilent E3616A DC Power Supply 60 Watt DC Power Supply from the E3600 Series

Agilent E3616A DC Power Supply
60 Watt DC Power Supply from the E3600 Series