Digital Input/Ouput
Use the digital outputs with
an external power supply to control microwave switches and attenuators,
solenoids, power relays, indicators, and more. Use the digital
inputs to sense limit switch and digital bus status. There are
no complex handshake modes; reads and writes are initiated either
from the front panel or the bus.
Totalize Input
Count events from devices like photo
interrupters, limit switches, and Hall-effect sensors. It keeps an updated total which can
be read via the front panel or programmatically at any time. With
26 bits of resolution, it can count events at full speed for nearly
45 minutes without an overflow.
Analog Output Use the two electronically calibrated
analog outputs to source bias voltages to your device under test,
to control your analog programmable power supplies, or use the
outputs as setpoints for your control systems. The outputs are
programmed directly in volts, either from the front panel or from
the bus. |
