New! Tektronix TDR and Electrical Sampling Modules:
Models Available: 80E01, 80E02, 80E03, 80E04, 80E06, 80E07, 80E08, 80E09, 8E010

All modules have independent incident step and receiver deskew to remove the effect of measurement fixtures and probes that enable faster and easier de-embedding of test fixtures. When the user employs these modules with Tektronix IConnect® TDR and VNA software, he or she can acquire up to 1,000,000 data points and obtain up to 50 GHz differential, mixed-mode and single-ended S-parameters. IConnct also enables impedance, S-parameters and eye diagram compliance testing as required by various serial data standards, as well as full channel nalysis,Touchstone (SnP) file output and SPICE modeling for gigabit interconnects.
For S- Parameter and TDR Testing - See All Modules
Learn more about the DSA8200 Sampling Oscilloscopes

All Modules:

• Up to 70 GHz Bandwidth and 5 ps Measured Rise Time (10 - 90%)
• Lowest Noise for Analysis – 450 μV_RMS at 60 GHz, 300 μV_RMS at 30 GHz
• Remote Samplers*¹ Enable Location of Sampler Near DUT and Ensure Best Signal Fidelity
• Independent Sampler Deskew Ensures Easy Fixture and Probe De-embedding
• Dual Channel (Except 80E01 and 80E06)
• Precision Microwave Connectors (3.5 mm, 2.92 mm, 2.4 mm and 1.85 mm)
• Probe Support (Except 80E06)

TDR Modules:

• 15 ps Reflected True Differential Fully Integrated TDR Rise Time (12 ps Incident) and Feature Resolution Below 1 mm
• Efficient, Accurate, Easy to use, and Cost Effective S-parameters up to 50 GHz

TDR Modules	Variable Bandwidth	CH	Step Reflected Rise Time	RMS Noise	Dynamic Range	Remote sampler
80E10	50 GHz	2	15 ps	≤600µVRMS	1.0 Vp-p	Yes
	40 GHz		-	≤370µVRMS
	30 GHz		-	≤300µVRMS
80E08	30 GHz	2	22 ps	≤300µVRMS	1.0 Vp-p	Yes
	20 GHz		-	≤280µVRMS
80E04	20 GHz	2	35ps	≤600µVRMS	1.0 Vp-p	Extender cable, accessory

Electrical Modules	Varaible Bandwidth	CH	Acquisition Rise Time (10% - 90-%)	RMS Noise	Dynamic Range	Remote Sampler
80E09	60 GHz	2	5.8 ps	450µVRMS	1.0 Vp-p	Yes
	40 GHz		-	330µVRMS
	30 GHz		-	300µVRMS
80E07	30 GHz	2	11.7 ps	300µVRMS	1.0 Vp-p	Yes
	20 GHz		-	280µVRMS
80E03	20 GHz	2	17.5 ps	≤600µVRMS	1.0 Vp-p	Extender cable, accessory

• Impedance Characterization and S-parameter Measurements for Serial Data Applications
• Advanced Jitter, Noise and BER Analysis
• Channel and Eye Diagram Simulation and Measurement-based Spice Modeling

80E10, 80E08, and 80E04

• High-Performance TDR/T Measurements
• Impedance Profile, Inductance, Capacitance and S-parameters
• Transmission Line Quality, Impedance, and Crosstalk
• True Differential, Common Mode, and Single Ended Measurements
• Efficient Fault Isolation

80E09, 80E07, 80E06, 80E01

• High-Frequency, Low-Noise Signal Acquisition
• Fast Rise Time Measurements
• Jitter Analysis and Waveform Analysis

80E03 and 80E02

• Device Characterization, Transmission Quality, Waveform Parameters
• Low Signal Measurements

*¹ Integrated on 80E07 – 80E10 and optional on 80E01 – 80E04 and 80E06.

Model#	Description	Includes	To request a free quote
80E10	Dual  Channel, 50 GHz True Differential TDR Sampling Module with Remote Samplers	User manual, certificate of traceable calibration standard, two precision adapters to 2.92 mm included with 50 Ω SMA terminations.
80E09	Dual  Channel, 60 GHz Sampling Module.
80E08	Dual Channel, 30 GHz True Differential TDR Sampling Module with Remote Samplers	User manual, certificate of traceable calibration standard, two 50 Ω SMA terminations.
80E07	Dual  Channel, 30 GHz Sampling Module.
80E06	70+ GHz Electrical Sampling Module.	User manual, calibration data report, precision adapter to 2.92 mm with 50 Ω SMA termination.
80E06X2	Bundled ordering configuration provides two 80E06 modules.
80E04	Dual Channel, 20 GHz True Differential TDR Sampling Module	User manual, calibration data report, two 50 Ω SMA terminations.
80E03	Dual Channel, 20 GHz Sampling Module.
80E02	Dual Channel, 12.5 GHz Sampling Module.
80E01	Single Channel, 50 GHz Sampling Module.	User manual, calibration data report, precision adapter to 2.92 mm included with 50 Ω SMA termination.

For more information on TDR Modules - View Datasheet

For more information call us toll free (800)-937-4688 (option 2) or