Test Equipment

"0"

Test Equipment Products

Logic Analyzers
Network Analyzers
Oscilloscopes
Signal/Spectrum Analyzers
Signal Generators
Wireless Communications

Manufacturers

Agilent (HP)
Dranetz-BMI
Fluke Networks
QuadTech
Rohde & Schwarz
Spirent (TAS)
Tektronix

New and used
test equipment
rental and sales including:
oscilloscopes
network analyzers
spectrum analyzers
and other electronic
testing equipment from:
Tektronix
Agilent
Fluke
QuadTech,
Rohde and Schwarz
among other respected
tested manufacturers.

Search Results: The equipment below may be available new or used, for rental, sale or lease.
Rohde & Schwarz FSQ3 Signal Analyzer, 20 Hz - 3.6 GHz 28 MHz I/Q demodulation bandwidth. 16 Msample I and Q memory. I/Q data extraction. Spectrum and code domain power measurements for: 3GPP FDD/HSDPA, cdma2000, cdma2000 1xEV-DV, cdma2000 1xEV-DO, TD-SCDMA. Spectrum and modulation measurements for: GSM/EDGE, Bluetooth, WLAN. General vector signal analysis. Versatile resolution filters: Gaussian, FFT, channel, RRC. Full choice of detectors.

Rohde & Schwarz FSQ8 SIGNAL ANALYZER

Rohde & Schwarz AM300 Dual Channel Arbitrary / Function generator Standard Functions Sine, square, triangle, ramp, pulse, noise, exponential. Maximum Frequency Ranges 35MHz sine, 50 MHz square, 500kHz for triangle, ramp and exponential. Modulation AM, FM, fM, FSK, PSK. Arbitrary Waveforms 100 Msamples/s, 16 to 256k points per channel. Amplitude Range 1 mV to 10 V (Vpp) with 14-bit resolution. Pulse 20ns to 9999s, selectable pulse width; rise time <10ns. Sweep Linear and logarithmic. Trigger 1 trigger input, 2 sync outputs. Burst 1 to 65536 periods per burst. Dimensions 8.6? W x 5.8? H x 13.8? D (219 x 147 x 350 mm). Weight 13.7 lbs (~6.2kg).

Rohde & Schwarz FS300 Spectrum Analyzer Frequency range 9 kHz - 3 GHz. Resolution bandwidth 200 Hz - 1 MHz (1, 2. 3, 5 sequences). Video bandwidths 10 Hz - 1 MHz (1, 2. 3, 5 sequences). Ave noise level @ 500 MHz -120 dBm typical (300 Hz RBW). Attenuator 0-70 dB in 2 dB steps, manual, or automatic. Reference level -110 dBm to +33 dBm. Intermodulation-free Range <-70 dBc, 2x ?30 dBm (TOI > 5 dBm). SSB phase noise <-90 dBc (1 Hz) at 10 KHz offset. Marker Normal, delta, noise, frequency counter, peak. Dimensions (W x H x D) 8.6? W x 5.8? H x 13.8? D (219 x 147 x 350 mm). Weight 15.4 lbs (~7 kg).

Rohde & Schwarz FS315 Spectrum Analyzer, 0Hz to 3GHz The new Spectrum Analyzer R&S FS315, includes a tracking generator and thus expands the field of application to scalar transmission and reflection measurements. A special feature of the tracking generator is the user-selectable frequency offset in the range from 0 Hz to 3 GHz, which makes it possible to perform measurements on frequency-converting DUTs such as a frequency mixer. For simple applications, the tracking generator can also be used as a CW signal source with a permanently set frequency.

Rohde & Schwarz FSEA20 Spectrum Analyzer, 9kHz-3.5GHz Frequency range: 9kHz-3.5GHz. Resolution Bandwidth: 1Hz-10MHz; Sensitivity: -145dBm.

Rohde & Schwarz FSEA30 Spectrum Analyzer, 20kHz-3.5GHz Frequency range: 20kHz-3.5GHz. Resolution Bandwidth: 1Hz-10MHz; Sensitivity: -155dBm.

Rohde & Schwarz FSEB20 Spectrum Analyzer, 9kHz-7GHz Frequency range: 9kHz-7GHz. Resolution Bandwidth: 10Hz-10MHz; Sensitivity: -142dBm.

Rohde & Schwarz FSEB30 Spectrum Analyzer, 20kHz-7GHz Frequency range: 20kHz-7GHz. Resolution Bandwidth: 1Hz-10MHz; Sensitivity: -152dBm.

Rohde & Schwarz FSEK20 Spectrum Analyzer, 9kHz-40GHz Frequency range: 9kHz-40GHz. Resolution Bandwidth: 10Hz-10MHz; Sensitivity: -148dBm.

Rohde & Schwarz FSEK30 Spectrum Analyzer, 20kHz-40GHz Frequency range: 20kHz-40GHz. Resolution Bandwidth: 1Hz-10MHz; Sensitivity: -138dBm.

Rohde & Schwarz FSEM20 Spectrum Analyzer, 9kHz-26.5GHz. Frequency range: 9kHz-26.5GHz. Resolution Bandwidth: 10Hz-10MHz; Sensitivity: -108dBm.

Rohde & Schwarz FSEM30 Spectrum Analyzer, 20Hz-26.5GHz Frequency range: 20kHz-26.5GHz. Resolution Bandwidth: 1Hz-10MHz; Sensitivity: -123dBm.

Rohde & Schwarz FSH18 Handheld Spectrum Analyzer, 10MHz - 18GHz The R&S FSH18 is the perfect handheld tool in the field for many different applications such as servicing microwave links, field strength measurements, and signal monitoring from 10 MHz up to 18 GHz

Rohde & Schwarz FSH3-TV Spectrum/TV Analyzer 100kHz - 3GHz Combines the functions and features of a complete spectrum analyzer with those of a TV test receiver. Measurement functions for analog and digital TV signals. Combined video/ASI output. Up to four hours operating time on battery power.

Rohde & Schwarz FSH313 Handheld Spectrum Analyzer Frequency range 100 kHz ? 3 GHz. Resolution bandwidth 1 kHz - 1 MHz. Video bandwidths 10 Hz - 1 MHz. Displayed ave. noise level -116 dBm (1 kHz) typical (depending on model/frequency range). T.O.I. 15 dBm typical (depending on model/frequency range). SSB phase noise ?100 dBc (Hz) @ 100 Hz from carrier. Detectors Sample, peak, auto-peak, RMS, average & (quasi peak option K3). Level measurement accuracy 1.5 dB (Typ 0.5). Reference level -80 dBm - +20 dBm. Display 5.7? (14 cm) color LCD, 320 x 240 pixels (1/4 VGA). Dimensions 10.6? H x 6.7? W x 4.7? D (27 x 17 x 12 cm). Weight 5.5 lbs (2.5 kg). Includes Tracking Generator.

Rohde & Schwarz FSH323 Handheld Spectrum Analyzer Frequency range 100 kHz ? 3 GHz. Resolution bandwidth 1 kHz - 1 MHz. Video bandwidths 10 Hz - 1 MHz. Displayed ave. noise level -116 dBm (1 kHz) typical (depending on model/frequency range). T.O.I. 15 dBm typical (depending on model/frequency range). SSB phase noise ?100 dBc (Hz) @ 100 Hz from carrier. Detectors Sample, peak, auto-peak, RMS, average & (quasi peak option K3). Level measurement accuracy 1.5 dB (Typ 0.5). Reference level -80 dBm - +20 dBm. Display 5.7? (14 cm) color LCD, 320 x 240 pixels (1/4 VGA). Dimensions 10.6? H x 6.7? W x 4.7? D (27 x 17 x 12 cm). Weight 5.5 lbs (2.5kg). Includes Tracking Generator and Preamplifier.

Rohde & Schwarz FSH3 Handheld Spectrum Analyzer Frequency range 100 kHz ? 3 GHz. Resolution bandwidth 1 kHz - 1 MHz. Video bandwidths 10 Hz - 1 MHz. Displayed ave. noise level -116 dBm (1 kHz) typical (depending on model/frequency range). T.O.I. 15 dBm typical (depending on model/frequency range). SSB phase noise ?100 dBc (Hz) @ 100 Hz from carrier. Detectors Sample, peak, auto-peak, RMS, average & (quasi peak option K3). Level measurement accuracy 1.5 dB (Typ 0.5). Reference level -80 dBm - +20 dBm. Display 5.7? (14 cm) color LCD, 320 x 240 pixels (1/4 VGA.). Dimensions 10.6? H x 6.7? W x 4.7? D (27 x 17 x 12 cm). Weight 5.5 lbs (2.5 kg).

Rohde & Schwarz FSH4 Hand Held Spectrum Analyzer, 3.6GHz High sensitivity < minus 141dBm (1Hz), with preamplifier < minus 161 dBm (1Hz). Low measurement uncertainty <1 dB. Internal tracking generator and VSWR bridge with built-in DC voltage supply. Two-port network analyzer.

Rohde & Schwarz FSH626 Handheld Spectrum Analyzer Frequency range 100 kHz ? 6 GHz. Resolution bandwidth 1 kHz - 1 MHz. Video bandwidths 10 Hz - 1 MHz. Displayed ave. noise level -116 dBm (1 kHz) typical (depending on model/frequency range). T.O.I. 15 dBm typical (depending on model/frequency range). SSB phase noise ?100 dBc (Hz) @ 100 Hz from carrier. Detectors Sample, peak, auto-peak, RMS, average & (quasi peak option K3). Level measurement accuracy 1.5 dB (Typ 0.5). Reference level -80 dBm - +20 dBm. Display 5.7? (14 cm) color LCD, 320 x 240 pixels (1/4 VGA). Dimensions 10.6? H x 6.7? W x 4.7? D (27 x 17 x 12 cm). Weight 5.5 lbs (2.5 kg).Includes Tracking Generator and preamplifier.

Rohde & Schwarz FSH6 Handheld Spectrum Analyzer Frequency range 100 kHz ? 6 GHz. Resolution bandwidth 1 kHz - 1 MHz. Video bandwidths 10 Hz - 1 MHz. Displayed ave. noise level -116 dBm (1 kHz) typical (depending on model/frequency range). T.O.I. 15 dBm typical (depending on model/frequency range). SSB phase noise ?100 dBc (Hz) @ 100 Hz from carrier. Detectors Sample, peak, auto-peak, RMS, average & (quasi peak option K3). Level measurement accuracy 1.5 dB (Typ 0.5). Reference level -80 dBm - +20 dBm. Display 5.7? (14 cm) color LCD, 320 x 240 pixels (1/4 VGA). Dimensions 10.6? H x 6.7? W x 4.7? D (27 x 17 x 12 cm). Weight 5.5 lbs (2.5 kg).

Rohde & Schwarz FSH8 Frequency range from 9 kHz to 8 GHz High sensitivity < minus 141dBm(1Hz), with preamplifier < minus 161 dBm(1 Hz ). Low measurement uncertainty <1 dB. Internal tracking generator and VSWR bridge with built-in DC voltage supply. Two-port network analyzer.

Rohde & Schwarz FSIQ3-B4-B5-B7-B9-B12-B16-B17-B22-K10-K11-K71-K72 SIGNAL ANALYZER, 20 Hz - 3.5 GHz SIGNAL ANALYZER; 20 HZ TO 3.5 GHZ. Spectrum Analysis with Ultra-wide Dynamic Range. Integrated Vector Signal Analyzer. OPTS includes:B4-5-7-9-12-16-17-22-K10-11-71-72 B4 = B5 = B7 = B9 = Tracking generator 3.5 GHz with I/Q modulator. B12 = Switchable attenuator for tracking generator. B16 = Ethernet interface 15: contact AUI connector. B17 = 2nd IEC/IEEE bus interface. B22 = K10 = GSM test software, mobile. K11 = GSM test software, BTS. K71 = IS-95 CODE POWER,REQUIRES B70. K71 = K72 =

Rohde & Schwarz FSL-B10 GPIB Interface for FSL

Rohde & Schwarz FSL-B22 RF preamplifier, gain 20 dB RF Preamplifier

Rohde & Schwarz FSL-B30 DC power supply 12 - 28 V Power Supplies for Spectrum Analyzer (FSL313)

Rohde & Schwarz FSL-B31 NiMH battery pack Battery Pack for Spectrum Analyzers (FSL313)

Rohde & Schwarz FSL-Z3 Soft carrying bag

Rohde & Schwarz FSL18 Spectrum Analyzer Spectrum Analyzer, 9 kHz to 18 GHz

Rohde & Schwarz FSL313 Spectrum Analyzer, 9kHz-3GHz w/tracking generator Spectrum Analyzer

Rohde & Schwarz FSL3 Spectrum Analyzer, 9kHz-3GHz

Rohde & Schwarz FSV Signal and Spectrum Analyzer Frequency range up to 3.6 GHz/7 GHz/13.6 GHz/30 GHz/40 GHz. 40 MHz analysis bandwidth. 0.4 dB level measurement uncertainty up to 7 GHz. Analysis software for GSM/EDGE (including EDGE evo), WCDMA/HSPA+, LTE, WiMAX™, WLAN, analog modulation methods. Support of power sensors from the R&S NRP family along with extensive power measurement functions. Easy on-site upgrading with options. –110 dBc (1 Hz) phase noise at 10 kHz frequency offset. +15 dBm third order intercept (TOI). Displayed average noise level (DANL) in 1 Hz bandwidth: –155 dBm at 1 GHz, –147 dBm at 30 GHz. Removable hard drive for applications where security is a concern.

Rohde & Schwarz SM300 Vector Signal Generator Frequency range 9 kHz - 3 GHz. RF Level Range: -127 to +13 dBm, Setting time: <10ms, Resolution: 0,1 dB, Uncertainty: < 1 dB, (Electronic Attenuator). SSB phase noise <-95 dBc (1 Hz) at 1 GHz, carrier offset 20 KHz offset. Broadband noise <-123 dBc at 1GHz, carrier offset >2MHz. Modulation possibilities AM: 0 to 100%, Intern, Extern AC/DC, FM: 20 Hz to 100 kHz, Intern, Extern AC/DC , PM: 0 to 10(5) rad, Intern, I/Q: DC to 40 MHz, External, Pulse: Raise/Fall time, 500 ns, Intern/extern. Modulation Generator 20 Hz to 80 kHz (sine). Pulse Generator 100 ms to 1 s pulse width. Sweep capabilities RF: Frequency & Level LF: Frequency. Dimensions (W x H x D) 8.6? W x 5.8? H x 13.8? D (219 x 147 x 350 mm). Weight 15.4 lbs (~7 kg).

Rohde & Schwarz SMA100A Signal Generator , 9kHz to 3GHz -Very low SSB phase noise of typ. –135 dBc (20 kHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth), typ. –140 dBc with the Enhanced Phase Noise Performance option (R&S SMA-B22) -Wideband noise of typ. –160 dBc (>10 MHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth) -Nonharmonics of typ. –100 dBc (>10 kHz carrier offset, f < 1500 MHz, with the R&S SMA-B22 option)

Rohde & Schwarz SMIQ02B Signal Generator Frequency Range: 300kHz-2.2GHz; resolution: 0.1HZ; Level Range: -140dBm to +13dBm; resolution: 0.1dB; Phase offset: adjustable in steps of 0.1 degrees.

Rohde & Schwarz SMIQ03B Signal Generator Frequency Range: 300kHz-3.3GHz; resolution: 0.1HZ; Level Range: -140dBm to +13dBm; resolution: 0.1dB; Phase offset: adjustable in steps of 0.1 degrees.

Rohde & Schwarz SMIQ04B Signal Generator Frequency Range: 300kHz-4.4GHz; resolution: 0.1HZ; Level Range: -140dBm to +13dBm; resolution: 0.1dB; Phase offset: adjustable in steps of 0.1 degrees.