Test Equipment

"0"

Test Equipment Products

Logic Analyzers
Network Analyzers
Oscilloscopes
Signal/Spectrum Analyzers
Signal Generators
Wireless Communications

Manufacturers

Agilent (HP)
Dranetz-BMI
Fluke Networks
QuadTech
Rohde & Schwarz
Spirent (TAS)
Tektronix

New and used
test equipment
rental and sales including:
oscilloscopes
network analyzers
spectrum analyzers
and other electronic
testing equipment from:
Tektronix
Agilent
Fluke
QuadTech,
Rohde and Schwarz
among other respected
tested manufacturers.

Search Results: The equipment below may be available new or used, for rental, sale or lease.
Dranetz-BMI A-115A Clamp-On Current Probe Range: 1MA-60A AC; frequency range: 10kHz-6kHz; working voltage: 750V rms; maximum cable diameter: .47" jaw (12mm), smart probe memory capacity 2kB, harmonic ranges: (voltage and current) 10Hz-6kHz; used with model 3030A.

Dranetz-BMI A-120 Smart Probe Range: 10-3000A continuous, Frequency range: 30Hz -3kHz; isolation: 4000V; jaw window: cable-2.56"; bus bar: 1.97 X 5.31", 2.56 X 3.94".

Dranetz-BMI DRADRANFLEX3K36 Flexible current probe, 3000A, 36 inches For use with PP4300 and PX5. No adapter needed.

Dranetz-BMI DRARR3035/36 Flexible current probe, 3000A, 36 inches Flexible Current Probe for use with PP1, PP4300, PX5. 1A-30/300/3000A, 8Hz.-7kHz.

Dranetz-BMI MCR-P Solid State Memory Card Reader/Writer REQUIRES: Computer (80x86/Pentium or equivalent CPU) Available Printer Port Windows 95/98/2K, NT 4.0, 3.x, or DOS. CARD TYPES (Type I and II 68-pin PC Cards): ATA Flash CompactFlash with an adapter SRAM SmartMedia (SSFDC) with an ATA adapter Linear Flash (binary programming)

Dranetz-BMI PP1-PTR-SCC8 Portable Three Phase Power Analyzer Eight Channel, 4 Voltage and 4 Current. Easy Start for automated set-ups(TASKCards PQPlus and Flicker). Scope Mode. Meter Mode. TASKCard Operating System Technology. Measure Power Quality, Harmonics, Energy, InRush, and Flicker. Measure V,I,W, VA,VAR,PF, Demand & Energy (TASKCard 8000). Cycle-by-Cycle Disturbance Capture (TASKCard PQPlus). Two Hour UPS. Menu Driven Operation. RS-232 Serial Interface. Waveform Capture (TASKCard PQPlus). Simultaneous Channel Capture. Classifies Power Quality Disturbances to IEEE 1159 (TASKCard PQPlus). Recommended Practice for Power Quality Monitoring. Classifies Voltage Flicker in Accordance with IEC-868(TASKCard Flicker).Time Plot Any Monitored Parameter. Integral PC Memory Card Interface. Supported by DRANVIEW PC Analysis and Report Writer. Opt PTR = Internal Printer. Opt SCC8 = Soft Carrying Case.

Dranetz-BMI PP1 Portable Three Phase Power Analyzer Portable three phase power quality, harmonics, energy and flicker analyzer 8 differential input channels (4 voltage and 4 current). LCD Display, scope mode, meter mode, internal UPS, RS232 port, 12VDC operation, 4 digital inputs, 4 relay outputs, 750k internal memory. Opt. PTR internal printer.

Dranetz-BMI PP4300 Power Platform 4300 Mainframe Hand-held 3 phase power analyzer mainframe-requires DRA PQ lite XXXX card.

Dranetz-BMI PQ-PLUS PQ Plus Task Card Task Card PQ Plus Power Quality Analysis. Measures, records & analyzes power quality, power W,VA,VAR,PF, Demand/Energy KW, KWH, Harmonics.

Dranetz-BMI PQLITE/H-T-E-M TASKCARD PQLITE/H-T-E-M TASK CARD FOR THE PP4300 MAINFRAME Up to 16 Power Parameters Including: Voltage, True RMS, Current, Power, Volt-Amps, Power Factor, Demand, Sag, Surge. * H- Adds complete harmonic analysis of voltage,current THD, individual harmonic orders to the 50th. * T- Adds voltage and current transient capture. * E- Adds demand and energy recording * M- Adds Memory Card Capabilities

Dranetz-BMI PUMA Point-of-Utilization Monitoring Adapter Allows users to safely connect a monitor in series with a particular piece of equipment for its load characteristics, energy usage and efficiency, and any potential power quality related issues.

Dranetz-BMI PX5 PowerXplorer Power Analyzer PowerXplorer Power Analyzer. Measures W, VA, VAR, TPF, DPF, Demand, Energy, etc. 4 differential inputs, 1-600 Vrms, AC/DC, 0.1% rdg, 256 samples/cycle, 16 bit ADC. 4 inputs with CTs 0.1-6000 Arms CT-dependent, AC/DC, 0.1%rdg + CTs, 256 samples/cycle, 16 bit ADC 1 MHz High Speed Sampling, 14 bit ADC, 1%FS Frequency Range, 10m Hz resolution, 45-65 Hz or 380-420 Hz. Compatable probes: TR-2500/A, TR-2510/A, TR-2520/A, TR-2021, TR-2019B, TR-2022, TR-2023, ISO-658-5, RR3035/xx, RR6035/xx, Dranflex

Dranetz-BMI TASK-8000 TASKCard 8000 for DRAPP1 TASKCard 8000 for the DRAPP1 mainframe. Measurments include: Energy Analysis/Harmonics, Power flow, Scope mode, Phasor diagrams, Long-term trends, demand, kWh, power factor.

Dranetz-BMI TASK-INRUSH Inrush Task Card Task Card Inrush analysis. Measures, records, and analyzes. Monitor Inrush events, motor starts, transformer magnetization, breaker trips and selectable triggers.

Dranetz-BMI TASK808/H-M TASKCard 808/H-M for DRAPP4300 -Measure, record, and analyze V, A, BA, VAR's, PF, demand and energy. -Complete harmonic analysis of voltage, current and harmonic power as well as all individual harmonic orders to the 50th.

Dranetz-BMI TR-2500 Current Probe 10A to 500A, For use with DRA/BMI PP4300's.

Dranetz-BMI TR-2510 Current Probe 0.1 to 10A, For use with DRA/BMI PP4300's.

Dranetz-BMI TR-2520 Current Probe 300A to 3000A. For use with DRA/BMI PP4300's.