|
New and used
test
equipment
rental and sales including:
oscilloscopes
network
analyzers
spectrum analyzers
and other electronic
testing
equipment from:
Tektronix
Agilent
Fluke
QuadTech,
Rohde
and Schwarz
among other respected
tested manufacturers.
|
Tektronix Model DPO7104 from DPO7000 Series
| Hot New Tektronix Product for RENT
|
Tektronix DPO7104 Digital Phosphor Oscilloscope
|
The Tektronix DPO7104 is part of a new generation of digital phosphor oscilloscopes. The DPO7000 Series from Tektronix is the industry’s best solution to the challenging signal integrity issues faced by designers verifying, characterizing, debugging, and testing sophisticated electronic designs. The DPO7104 is a 1GHz Digital Phosphor Oscillocope. See details below. |
 |
Features and Benefits: |
-
1 GHz Bandwidth Model
-
Up to 10 GS/s Real-time Sample Rate on All Four Channels
-
Up to 400 Megasamples Record Length with MultiView Zoom™ Feature for Quick Navigation
-
>250,000 wfms/s Maximum Waveform Capture Rate
-
MyScope® Custom Windows Enhance Productivity
-
Right Mouse Click Menus for Exceptional Efficiency
-
Pinpoint™ Triggering Provides the Most Flexible and Highest Performance Triggering, with 1400 Other Combinations to Address Virtually Any Triggering Situation
-
Small Footprint and Light Weight
-
12.1” Largest XGA Touch Screen Display in the Industry
-
Communications Mask Testing
-
Clock Recovery from Serial Data Streams and NRZ Serial Pattern Trigger for Isolation of Pattern-dependent Effects
-
Low-speed Serial Protocol Triggering (I2C, SPI, CAN)
-
Technology-specific Software Solutions Provide Built-in Domain Expertise for Jitter and Timing Measurements, Power Measurements, Serial Data, Ethernet and USB2.0 Compliance Testing
-
OpenChoice® Software with Microsoft Windows XP OS Enables Built-in Networking and Extended Analysis
|
Characteristics: |
| Input Channels |
4 |
Hardware Analog Bandwidth (-3 dB) |
1 GHz |
Rise Time 10% to 90% (typical) |
225 ps |
Rise Time 20% to 80% (typical) |
160 ps |
DC Gain Accuracy |
±1.25% (±1% typical) with offset/position set to 0 |
Hardware Bandwidth Limits |
250 MHz or 20 MHz |
Input Coupling |
AC, DC, GND |
Input Impedance (software selectable) |
1 MΩ ±1% or
12pF ±2pF or
50 Ω ±1% |
Input Sensitivity, 1 MΩ |
1 mV/div to 10 V/div |
Input Sensitivity, 50 Ω |
1 mV/div to 1 V/div |
Vertical Resolution |
8 bit (>11 bit with averaging) |
Max Input Voltage, 1 MΩ |
±150 V CAT I, derate at 20 dB/decade to 9 VRMS above |
Max Input Voltage, 50 Ω |
5 VRMS, with peaks less than ±24 V |
Position Range |
±5 divisions |
Offset Range |
1 mV/div to 50 mV/div: ±1 V
50.5 mV/div to 99.5 mV/div: ±0.5 V
100 mV/div to 500 mV/div: ±10 V
505 mV/div to 995 mV/div: ±5 V
1 V/div to 5 V/div: ±100 V
5.05 V/div to 10 V/div: ±50 V |
Offset Accuracy |
1 mV/div to 9.95 mV/div: ±0.2% (offset value-position) ±0.1 div ±1.5 mV
10 mV/div to 99.5 mV/div: ±0.35% (offset value-position) ±0.1 div ±1.5 mV
100 mV/div to 1 V/div: ±0.35% (offset value-position) ±0.1 div ±15 mV
1.01 V/div to 10 V/div: ±0.25% (offset value-position) ±0.1 div ±150 mV |
Delay between any two channels (typical) |
≤100 ps (50 Ω, DC coupling and equal V/div at or above 10 mV/div) |
Channel-to-channel Isolation (Any Two Channels at Equal Vertical Scale Settings) |
≥100:1 at ≤100 MHz and ≥30:1 above |
| |
|
|
Options Available: |
Record Length Options |
Sample Rate Options |
Software Options |
| 2RL - 80MSamples max, 20 MSamples/ch |
2SR -Double maximum real time sample rate:
DPO7104: 40 GS/s (1 channel), 20 GS/s (2 channels), 10 GS/s (3 or 4 channels)
DPO7054: 20 GS/s (1 channel), 10 GS/s (2 channels), 5 GS/s (3 or 4 channels) |
JE3 - TDSJIT3 Essentials Jitter Analysis Software |
| 5RL - 200MSamples max, 50 MSamples/ch |
LSA - Low Speed Serial Analysis includes CAN/LIN Trigger, Decode and Analysis |
| |
ET3*3 - TDSET3 Ethernet Compliance Test Software |
JA3 - TDSJIT3 Advanced Jitter Analysis Software |
| USB*4 - TDSUSBS USB2.0 Compliance Test S/W only |
MTM - Serial Communications Mask Testing |
PWR - DPOPWR Power Measurement and Analysis Software |
*3 Requires Ethernet Test Fixture.
*4 Requires TDSUSBF (USB Test Fixture).
|
|
|
|
|
| |
|