|
New and used
test
equipment
rental and sales including:
oscilloscopes
network
analyzers
spectrum analyzers
and other electronic
testing
equipment from:
Tektronix
Agilent
Fluke
QuadTech,
Rohde
and Schwarz
among other respected
tested manufacturers. |
HOT New Tektronix Product for RENT and SALE! |
Tektronix DPO4054 Digital Phosphor Oscilloscope
|
The DPO4054 is part of the newest addition to the Tektronix Digital Phosphor Oscilloscopes family, the DPO4000 Series. It is a 500 MHz, 2.5 GS/s, 10 M record length, 4 channel digital phosphor oscilloscope designed specifically for engineers and technicians who develop and debug electronic designs. |
|
Reserve your very own new Tektronix DPO4054 today - Add to Cart |
| |
| Signal Express™ (TE) -Learn More |
| |
Features and Benefits: |
- 500 MHz Bandwidth Model
- 4 Channel Model
- Sample Rates Up to 5 GS/s on All Channels
- 10 Megasample Record Length on All Channels
- 3,700 wfms/s Maximum Waveform Capture Rate
- Wave Inspector™ Controls Provide Unprecedented Efficiency in Waveform Analysis
- I2C, SPI, CAN Serial Triggering and Analysis
- 10.4 in. (264 mm) XGA Color Display
- Small Footprint and Lightweight - only 5.4 in. (137 mm) deep and 11 lbs. (5 kg)!
- USB and CompactFlash on Front Panel for Quick and Easy Storage
- Built-in Ethernet Port
- Plug ‘n’ Play Connectivity and Analysis Software Solutions
- USB 2.0 Device Port for Direct PC Control of Oscilloscope using USBTMC
- Suite of Advanced Triggers
- e*Scope® Remote Viewing and Control
- Interoperability with Tektronix Logic Analyzers
- TekVPI™ Probe Interface Supports Active, Differential and Current Probes for Automatic Scaling and Units
|
Characteristics: |
Vertical System |
Input Channels |
4
|
Analog Bandwidth (-3 dB) 5 mV/div - 1 V/div |
500 MHz |
Calculated Rise Time 5 mV/div (typical) |
700 ps |
Hardware Bandwidth Limits |
20 MHz or 250 MHz |
Input Coupling |
AC, DC, GND |
Input Impedance |
1 MΩ ±1%, 50 Ω ±1% |
Input Sensitivity, 1 MΩ |
1 mV/div to 10 V/div |
Input Sensitivity, 50 Ω |
1 mV/div to 1 V/div |
Vertical Resolution |
8 bits |
Max Input Voltage, 1 MΩ |
250 VRMS with peaks ≤±400 V |
Max Input Voltage, 50 Ω |
5 VRMS with peaks ≤±20 V |
DC Gain Accuracy |
±1.5% with offset set to 0 V |
Offset Range |
1 mV/div – 50 mV/div ±1 V
50.5 mV/div – 99.5 mV/div ±0.5 V
100 mV/div – 500 mV/div ±10 V
505 mV/div – 995 mV/div ±5 V
1 V/div – 5 V/div ±100 V
5.05 V/div – 10 V/div ±50 V |
Channel-to-channel Isolation (Any Two Channels at Equal Vertical Scale) |
≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated bandwidth |
| |
Horizontal System |
Maximum Sample Rate (all channels) |
2.5 GS/s |
Maximum Record Length (all channels) |
10 M points |
Maximum Duration at Highest Sample Rate (all channels) |
4 ms |
Timebase Range (s/div) |
1 ns to 1,000 s |
Timebase Delay Time Range |
–10 divisions to 50 s |
Channel-to-channel Deskew Range |
±100 ns |
Long Term Sample Rate and Delay Time Accuracy |
±5 ppm over any ≥1 ms interval |
Delta Time Measurement Accuracy |
±(1/sample rate + 5 ppm × |Reading| + 0.4 ns) |
|
To request a quote for Tektronix DPO4054 -- Add to Cart
|
|
|
| |
|